For technical support, customer service or warranty questions, dial customer service hot line (909) 625-2888. Please have your serial number and purchase receipt ready before you call.
MiracleTouch Driver
Please find Item No. on the back label of your touch LCD and download correct driver. Read Installation Manuel carefully before you start.
MiracleTouch (Infrared) Driver Installation. For Item# LT47B-IU, LT42B-IU, LT19H-IU, LT15H-IU, LT12B-IU, LT10B-IU and LT15H-IS, LT12B-IS.
1. Make sure to uninstall all old touch screen driver if there is any in your PC.
2. Connect LCD 15pin connector to your computer.
3. Connect USB cable to computer and USB touch LCD. If you have Serial Port touch LCD, connect serial cable to computer, serial touch LCD and key board or mouse.
4. Download MiracleTouch (Infared) driver, install it and reboot.
5. Window will find new hardware, then follow the window screen.
6. After celebration, you must touch OK button, then close.
7. You may download MiracleTouch (Infrared) installation Manuel and see how to connect serial cable step by step in detail.
MiracleTouch (Infrared) USB Driver Installation. For Item# LT47B-IU, LT42B-IU, LT19H-IU, LT15H-IU, LT12B-IU and LT10B-IU.
1. Make sure to uninstall all old touch screen driver if there is any in your PC.
2. Connect touch LCD 15pin connector to your computer.
3. If you have Serial Port touch LCD, connect the serial cable to computer, touch LCD and keyboard.
4. DO NOT CONNECT TOUCH SCREEN USB CABLE.
5. Download MiracleTouch Infared USB driver, install it and reboot.
6. Turn off the computer.
7. Connect USB cable to the monitor and computer.
8. Turn on the system.
9. Window will find new hardware, then follow the window screen.
10. After celebration, you must touch OK button, then close.
Miracle 5 Wire Resistive (USB & Serial) Driver Installation. For Item# LT19H-RU, LT17H-RU, LT17H-RS,LT15H-RU and LT15H-RS.
1. Make sure to uninstall all old touch screen driver if there is any in your PC.
2. If you have Serial Port touch LCD, connect the serial cable to computer, touch LCD and mouse or keyboard.
3. Download Miracle 5 Wire Resistive Touch Driver, install it.
4. When you install the driver, DO NOT check the box "install PS/2 interface driver". For 4 point calibration, check the box "next system boot up".
5. If you have USB touch LCD, connect USB cable when installation program ask you to do so.
6. Follow the window screen to finish installation, reboot.
For Item#LT19H-EU, LT17H-EU and LT15H-EU, please visit Elo Touch website, download and install correct driver for your operating system.